Python Packaging Guidelines

Python Version Support

In Fedora we have multiple Python runtimes, one for each supported major Python release. At this point that’s one for python3.x and one for python2.7. However the python2 stack will be removed from Fedora and is deprecated. Upstream support for the python2 interpreter officially ends in 2020. If a piece of software supports python3, it MUST be packaged for python3. Software using python2 MUST NOT be newly packaged into Fedora 30 or newer without FESCo exception. Packaging new python2 based packages into older Fedoras is discouraged, but doesn’t need an exception.

For guidelines on maintaining already existing python2 packages, see the appendix.

Multiple Python Runtimes

For backwards compatibility, /usr/bin/python is, if it is installed, a symbolic link to /usr/bin/python2.

Packages in Fedora MUST NOT use /usr/bin/python. Instead packages for Python 3 MUST use /usr/bin/python3 (even if upstream supports both Python 2 and 3). As a result of that /usr/bin/python (as well as /usr/bin/env python and similar) MUST NOT be used in shebang lines or as a dependency of a package. As of Fedora 30, all uses of unversioned python executables in shebang lines will fail the build. These shebangs MUST be fixed. If it is necessary to disable the checks, please see the information in Packaging:Guidelines#Shebang_lines.

All python runtimes have a virtual provide for python(abi) = $MAJOR-$MINOR. For example, the Python 3.7 runtime package has:

$ rpm -q --provides python3 | grep abi
python(abi) = 3.7

Python modules using these runtimes should have a corresponding "Requires" line on the python runtime that they are used with. This is done automatically for files below /usr/lib[^/]*/python${PYVER}

Mirroring the policy for regular packages, the Python-version-specific subpackages of your package MUST NOT be removed in a release branch of Fedora.

Naming

The source package for a Python library MUST be named with the python- prefix. A built package however must include the Python major version in the name, using the python3- prefix. This is accomplished by adding a subpackage. See example bellow.

This rule does not apply to applications.

Dependencies

Packages building for Python 3 will need BuildRequires: python3-devel.

Packages MUST NOT have dependencies (either build-time or runtime) on packages named with the unversioned python- prefix. Dependencies on Python packages instead MUST use names beginning with python3-.

Automatically generated dependencies

Packages MAY use the automatic Python dependency generator. This generator uses upstream egg/dist metadata (such as setuptool’s install_requires) to determine what the package should depend on. The generator parses the installed metadata from /usr/lib(64)?/pythonX.Y/site-packages/[^/]+++.(egg|dist)-info/requires.txt, so it will not work with software that uses plain distutils.

To enable this feature (F28 and F29), add:

%{?python_enable_dependency_generator}

To disable this feature (F30 and newer), add:

%{?python_disable_dependency_generator}

Although this statement can be used anywhere in the spec, we recommend putting it just before the main package’s %description declaration. This generates run time requires in the form of pythonX.Ydist(foo). If the generated dependencies are not accurate, additional ones can still be added manually. To remove some, a packager MAY modify upstream-provided metadata (usually specified in the setup.py file) in the %prep section of the specfile or fall back to filtering those dependencies.

The packager MUST inspect the generated requires for correctness. All dependencies MUST be resolvable within the targeted Fedora version.

As an example, the upstream notebook package has (as of version 5.6.0):

install_requires = [
    'jinja2',
    'tornado>=4',
    'pyzmq>=17',
    'ipython_genutils',
    'traitlets>=4.2.1',
    'jupyter_core>=4.4.0',
    'jupyter_client>=5.2.0',
    'nbformat',
    'nbconvert',
    'ipykernel',
    'Send2Trash',
    'terminado>=0.8.1',
    'prometheus_client'
],

And the resulting dependencies:

python3.7dist(ipykernel)
python3.7dist(ipython-genutils)
python3.7dist(jinja2)
python3.7dist(jupyter-client) >= 5.2.0
python3.7dist(jupyter-core) >= 4.4.0
python3.7dist(nbconvert)
python3.7dist(nbformat)
python3.7dist(prometheus-client)
python3.7dist(pyzmq) >= 17
python3.7dist(send2trash)
python3.7dist(terminado) >= 0.8.1
python3.7dist(tornado) >= 4
python3.7dist(traitlets) >= 4.2.1

This generator is enabled by default in Fedora 30 and later. If a packager wishes to explicitly opt out of the generator because the upstream metadata are not applicable, a packager SHOULD opt out explicitly by adding:

%{?python_disable_dependency_generator}

Provides

Using a fictional module named "example", the subpackage containing the python3 version must provide python3-example. This is of course always the case if the subpackage is named python3-example (as in the examples below). If the subpackage has some other name then then Provides: python3-example must be added explicitly (but see the %python_provide macro below).

The %python_provide macro

In order to make the switch from Python 2 to Python 3 automatic, all packages that provide python3-%{srcname} (for any %{srcname}) SHOULD use the %python_provide macro with the package name, for example:

%{?python_provide:%python_provide python3-%{srcname}}

This eases distribution-wide renaming of Python packages. (For example, in the future a virtual provide of python-%{srcname} might become appropriate for Python 3 libraries. In that case, %python_provide will be changed to add it.) Packages that do not include this macro would need to be adapted to such changes manually.

Automatic Provides with a standardized name

When building a Python package, RPM looks for .dist-info and .egg-info files or directories in the %files sections of all packages. If one or more are found, RPM parses them to find the standardized name (i.e. dist name, name on PyPI) of the packaged software, and then automatically creates two Provides: tags in the following format:

Provides: python3.Ydist(CANONICAL_STANDARDIZED_NAME)
Provides: python3dist(CANONICAL_STANDARDIZED_NAME)

The 3.Y is the Python version used (usually 3.6 and higher), and between the parentheses is the name of the software in a canonical format used by Python tools and services such as setuptools, pip and PyPI. The canonical name is obtained by switching the standardized name to lower case and converting all runs of non-alphanumeric characters to single “-” characters. Example: “The $$$ Tree” becomes “the-tree”.

Requires and BuildRequires with standardized names

These Provides tags can be used to list Requires and BuildRequires of a package using the standardized names (i.e. dist name, name on PyPI) of Python modules. To make it easier, you can use the %{py3_dist} macro that accept one or more parameters: the standardized name(s) of the desired Python software. It will convert the name(s) to the canonical format and create the proper python3dist(...) tag(s).

In addition, you can use the %{py_dist_name} macro that simply transforms any standardized name to the canonical format.

For example:

BuildRequires: %{py3_dist PyMySQL} >= 0.7.5
# => BuildRequires: python3dist(pymysql) >= 0.7.5

Requires: %{py3_dist virtualenv pyPEG2}
# => Requires: python3dist(virtualenv) python3dist(pypeg2)

%{py_dist_name 0-._.-._.-._.-._.-._.-._.-0}
# => 0-0

Source Files from PyPI

When packaging software which is available from PyPI, you can make use of the %pypi_source macro. This macro accepts from zero to three arguments and evaluates to an appropriate URL for the source file on PyPI. The arguments are:

  1. The name of the PyPI project. Defaults to %srcname if defined, or to %pypi_name if defined, or to %name (the package name).

  2. The version of the PyPI project. Defaults to %version (the package version).

  3. The file extension to use. Defaults to tar.gz.

In most cases it is not necessary to specify any arguments.

Macros

The following macros are defined for you in all supported Fedora and EPEL releases:

Macro Expanded path Notes

%{__python}

/usr/bin/python

Prohibited (see note below).

%{__python3}

/usr/bin/python3

Python 3 interpreter.

%{python_provide}

(Lua script)

Given a package name, evaluates to either Provides: python-$name or nothing at all depending on the Pythonversion. See The %python_provide macro for an example.

%{python3_sitelib}

/usr/lib/python3.X/site-packages

Where pure python3 modules are installed.

%{python3_sitearch}

/usr/lib64/python3.X/site-packages on 64bit architectures (e.g. x86_64) and /usr/lib/python3.X/site-packages on 32bit.

Where python3 extension modules (e.g. C compiled) are installed.

%{py_byte_compile}

(script)

See byte-compiling section for usage.

%{python3_version}

3.X

Python 3 version. Useful when running programs with Python version in filename, such as nosetest-%{python3_version}.

%{python3_version_nodots}

3X

Python 3 version without dots. Useful when listing files explicitly in %files section, such as %{python3_sitelib}/foo/*.cpython-%{python3_version_nodots}.pyo

%py3_build

%{__python3} setup.py build …

Various flags are added, see /usr/lib/rpm/macros.d/macros.python3 for details and similar macros. Define %py_setup_args to pass custom command line arguments to setup.py.

%py3_install

%{__python3} setup.py install --skip-build …

%{py_dist_name}

(Lua script)

Given a standardized name (i.e. dist name, name on PyPI) of Python software, it will convert it to a canonical format. See Automatic Provides with a standardized name for more information.

%{py3_dist}

(Lua script)

Given a standardized name (i.e. dist name, name on PyPI) of Python software, it will convert it to a canonical format, and evaluates to python3dist(CANONICAL_NAME), which is useful when listing dependencies. See Automatic Provides with a standardized name for more information.

%{pypi_source}

(Lua script)

Evaluates to the appropriate URL for the package. See above for more information.

During %install or when listing %files you can use the python3_sitearch and python3_sitelib macros to specify where the installed modules are to be found. For instance:

%files
# A pure python3 module
%{python3_sitelib}/foomodule/
# A compiled python3 extension module
%{python3_sitearch}/barmodule/

Use of the macros has several benefits:

  • It ensures that the packages are installed correctly on multilib architectures.

  • Using these macros instead of hardcoding the directory in the specfile ensures your spec remains compatible with the installed python version even if the directory structure changes radically (for instance, if python3_sitelib moves into %{_datadir}).

Files to include

When packaging python modules, several types of files are included:

  • *.py source files because they are used when generating tracebacks.

  • *.pyc byte compiled files.

    • Python will try to create them at runtime if they don’t exist which leads to spurious SELinux AVC denials in the logs.

    • If the system administrator invokes python with -OO, they will be created with no docstrings. This can break some programs.

  • *.egg-info files or directories. If these are generated by the module’s build scripts they must be included in the package because they might be needed by other applications and modules at runtime.

The source files MUST be included in the same package as the byte compiled versions.

Packagers SHOULD NOT simply glob everything under the sitelib or sitearch directories. The following SHOULD NOT be used:

  • %{python3_sitelib}/*

  • %{python3_sitearch}/*

  • %{python_sitelib}/*

  • %{python_sitearch}/*

And packages MUST NOT include the top-level __pycache__ directory (see below).

Byte compiling

Python will automatically try to byte compile files when it runs in order to speed up startup the next time it is run. These files are saved in files with the extension of .pyc (compiled python). These files will be located inside a directory named __pycache__.

The .pyc files contain byte code that is portable across OSes. If you do not include them in your packages, python will try (and generally fail) to create them when the user runs the program. If the system administrator runs the program, then the files will be successfully written, causing stray .pyc files which will not be removed when the package is removed. To prevent that the byte compiled files need to be compiled and included in the %files section. Normally, byte compilation is done for you by the brp-python-bytecompile script. This script runs after the %install section of the spec file has been processed and byte compiles any .py files that it finds in %{python3_sitelib} or %{python3_sitearch} (this recompilation puts the proper filesystem paths into the modules otherwise tracebacks would include the %{buildroot} in them).

You must include the .pyc files in your package. If the build process creates a __pycache__ directory in a subdirectory of %{python3_sitearch} or %{python3_sitelib}, you must also include all items in the __pycache__ directory. You MUST NOT include the directories %{python3_sitearch}/__pycache__ or %{python3_sitelib}/__pycache__ because they are already owned by the python3-libs package.

All that you need to do is include the files in the %files section (replacing %{python3_sitelib} with the appropriate macro for your package):

%files
%{python3_sitelib}/foo/

or, if the python code installs directly into %{python3_sitelib}:

%files
%{python3_sitelib}/foo.py
%{python3_sitelib}/__pycache__/*

Manual byte compilation

For more details on the internals of byte compilation, please see the appendix.

Example Python spec file

The following is a very simple spec file for a Python module.

python-example.spec
%global srcname example

Name:           python-%{srcname}
Version:        1.2.3
Release:        1%{?dist}
Summary:        Example python module

License:        MIT
URL:            https://pypi.python.org/pypi/example
Source0:        %{pypi_source}

BuildArch:      noarch

%description
An python module which provides a convenient example.

%package -n python3-%{srcname}
Summary:        %{summary}
BuildRequires:  python3-devel
%{?python_provide:%python_provide python3-%{srcname}}

%description -n python3-%{srcname}
An python module which provides a convenient example.

%prep
%autosetup -n %{srcname}-%{version}

%build
%py3_build

%install
%py3_install

%check
%{__python3} setup.py test

# Note that there is no %%files section for the unversioned python module
%files -n python3-%{srcname}
%license COPYING
%doc README.rst
%{python3_sitelib}/%{srcname}-*.egg-info/
%{python3_sitelib}/%{srcname}/
%{_bindir}/sample-exec

Packaging eggs

Please see the Python eggs guidelines for information specific to Python eggs.

Reviewer checklist

The following briefly summarizes the guidelines for reviewers to go over:

  • Must: Python modules must be built from source. They cannot simply drop an egg or whl from upstream into the proper directory. (See prebuilt binaries Guidelines for details).

  • Must: Python modules must not download any dependencies during the build process.

  • Must: When building a compat package, it must install using easy_install -m so it won’t conflict with the main package.

  • Must: When building multiple versions (for a compat package) one of the packages must contain a default version that is usable via "import MODULE" with no prior setup.

  • Should: If you build a python module you should use the %python_provide macro.

  • Should: A package which is used by another package via an egg interface should provide egg info.